Your Search: "torque wrench"

- Pre-calibrated torsion ratchet tool - Constructed with machined aluminum - Removable handle for easy storage in molded EVA case - Includes: 2.5, 3, 4, 5mm hex bits and T20, T25 Torx bits

The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles—reliable control of applied torque to protect sensitive components—with a click-torque wrench in the unmistakable Wera design. It features a very robust design with high accuracy, along with easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values facilitates the safe setting of the desired torque values, while the robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached - 16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) - Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes, and e-bikes - Easy setting and saving of the desired torque value with an audible and tactile click when the scale value is reached (click 1) - Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) - Precise to +/- 4%

Fits all 1/4-inch socket-type torque wrenches for use with the Prestacycle Bicycle Bit Set. Prestacycle's bits cost 1/10 the price of buying socket head sets to meet all the requirements of bicycles. Using bits allows you to perform initial installation with Prestacycle's reversible mini ratchet – then leave the bit inside the job – remove the mini ratchet – and connect your torque wrench onto the bit to finish final tightening.

- Square 3/8-inch reversible ratchet drive features unique push-through design for superior durability and reliability. - Designed for left-hand or right-hand thread 10-80Nm torque settings required for bottom brackets, cassette lockrings, and other high torque components. - Quickly set torque using a micrometer-style dial and simple locking mechanism. - Includes 3/8-inch square to 1/2-inch square adapter and 3/8-inch square to 1/4-inch hex adapter. Torque wrenches have become an essential bicycle tool. The increase in carbon fiber bikes and components have driven the need. While carbon fiber allows for more optimal design and provides a far higher strength to weight ratio compared to steel and aluminum, it is also more susceptible to crushing and cracking when improperly set up. Pedro's Grande Torque Wrench features a 350mm length designed for left-hand or right-hand thread 10-80Nm torque settings required for bottom brackets, cassette lockrings, and other high torque components. A unique push-through, reversible, 3/8-inch ratchet drive delivers superior durability and reliability. This click-type torque wrench makes an audible click when desired torque is reached and is quickly set in 0.5Nm increments using a micrometer-style dial and simple locking mechanism. The Grande Torque Wrench also features heat-treated steel construction for accuracy, strength, and reliability, and includes a 3/8-inch square to 1/2-inch square adapter and a 3/8-inch square to 1/4-inch hex adapter. Accurate to within +/- 4 percent. Backed by a Pedro's two year warranty.

- Mini torque wrench preset to 5 newton meters - Includes 3, 4, 5, and 6mm hex bits, T20 and T25 torx bits

High-performance bicycles require precision during setup and adjustment. The Preset Torque Wrench provides secure adjustments while preventing damage to lightweight bars and forks from over-tightening. Product details - Tools are pre-set to 5Nm or 6.8Nm - Check component tightening specifications before using - 4mm and T25 keys are non-removable

- Features with adjustable torque scale which ranged in 4 / 5 / 6 Nm - Preset torque prevents overtightening or damage to lightweight components. - Ergonomic T-handle provides easy rotation. - Note: Tighten the bolt clockwise only.

- Ratchet operates in clockwise and anti-clockwise directions - For tightening on right hand threaded bolts and nuts - Signal when set torque is reached - Default value for the recalibration interval is 12 months of use, or approximately 5000 cycles - Dual scaled, Nm and Kgm

- Adjustable torque wrench with ergonomic design - Twist dial adjust torque in preset 4, 5, and 6Nm settings - Includes 3, 4, and 5mm hex bits and T25 Torx bit

An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-1.2 is intuitive and easy to use, and applies up to 14 Nm of torque to any fastener or component with left or right-handed threads. Perfect for low-torque applications such as stem bolts, levers, and carbon fiber components. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet. - 0 to 14 Newton meter (0 to 140 inch-pound) range - 3/8" drive - Reads and registers torque values for both left hand and right hand threading - Length: 11.5" (292 mm)

- Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values - Head rotates for clockwise and counter-clockwise torquing - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 20-100 Nm; precise to +/- 3% as per DIN EN ISO 6789-1:2017-07 - Very robust design with ergonomic 2-component handle suitable for right-hand use - For 9x12 mm interchangeable insert tools

An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-2.2 is intuitive and easy to use, and applies up to 60 Nm of torque to any fastener or component with left or right-handed threads. Perfect for mid-to-high-torque applications such as bottom brackets, cassette lockrings, and crank bolts. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet, as well as most threaded bottom bracket tools. - 0 to 60 Newton meter (0 to 50 foot-pound) range - 3/8" drive - Reads and registers torque values for both left hand and right hand threading - Length: 17.75" (450 mm)

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case. - 10–60 Newton meter range (88–530 Inch Pounds) - Adjustable in 0.25 Nm increments - Ratcheting 3/8" drive - Reads and registers for both left hand and right hand threading - Dial-adjust system allows desired torque setting to be preset - Calibrated to be accurate to +/- 4% - Length: 36.2cm (14.25")

Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. For right-hand use (clockwise torque control) and with 45-tooth reversible ratchet mechanism. - With 1/4" square drive, reversible ratchet, 45 teeth - Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 2.5-25 Nm; Precise to +/- 4% - Designed with ergonomic 2-component handle suitable for right-hand use

1/4" Ratcheting Reversible Click-Type Micrometer Torque Wrench with Bit Set and Custom Tool Roll Pedro's Demi Torque Wrench II is designed for left-hand or right-hand thread 3-15Nm torque settings required for critical components such as handlebars, stems, and controls. The new design features an integrated bit holder for storage of 8 bits on the wrench for convenience and versatility and the small overall size and low-profile head are perfect for tight spaces and easy handling. The Demi Torque Wrench II is quickly set using a micrometer-style dial and a simple locking mechanism. Accurate to within +/- 4 percent. Backed by Pedro's two-year warranty. - Integrated bit holder for storage of 8 bits on the wrench - Square 1/4" reversible ratcheting drive designed for left-hand or right-hand thread 3-15Nm torque settings - Small overall size and low-profile head perfect for tight spaces and easy handling. - Includes custom tool roll for wrench and bit storage. Included bits and adapters: - Hex: 2.5, 3, 4, 5, 6, (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 (50mm) - Crowfoot: 7 & 8mm Flare - WrenchDrive Adapter: 1/4" square to 1/4" hex

Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. For right-hand use (clockwise torque control) and with 45-tooth reversible ratchet mechanism. - With 3/8" square drive, reversible ratchet, 45 teeth - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 10-50 Nm; Precise to +/- 3% - Very robust design with ergonomic 2-component handle suitable for right-hand use

- Use with any 3/8" drive torque wrench to accurately torque pedals with 15mm wrench flats. - Precision laser cut and heat treated tool steel for strength and lasting performance. The Crowfoot Pedal Wrench converts any 3/8" drive torque wrench into a pedal wrench to allow accurate installation torque for pedals with 15mm wrench flats. A perfect add-on for our Grande Torque Wrench.

Use the Crowfoot Flare Wrench on any 1/4" drive torque wrench to ensure accurate torque on delicate disc brake compression fittings. A perfect add-on for our Demi Torque Wrench. - Use with a torque wrench to accurately torque delicate hose fittings found on hydraulic disc brakes. - 1/4" square drive and 7 and 8mm flare style box wrenches - Precision laser cut and heat treated tool steel for strength and lasting performance.

A purpose-built wrench designed for compression nuts, nipples, and other fittings found on hydraulic brake systems. The five-sided flare wrench head evenly spreads out the force being applied to the wrench, reducing the risk of damage to fasteners and brake hoses. Features a slim, low-profile design to access low-clearance fittings found on hydraulic levers and calipers. Built-in 3/8" fittings allow for use with a torque wrench to achieve proper torque. - Double-sided wrench features 7mm and 8mm wrench openings - Dimensions: 4" x 0.75" x 0.15" (101mm x 19.5mm x 4.5mm) - Weight: 44g (1.55 oz.) NOTE: When using with a torque wrench, the MWF-3 should be installed at a 90° angle from the beam of the wrench.

- For installing DUB BSA bottom brackets - Compatible with a 3/8-inch drive torque wrench so you can torque to spec

- Designed specifically to install and/or remove Campagnolo Ultra-Torque bottom bracket cups - Allows use of a Torque wrench to obtain proper torque specifications

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

Park Tool's Pedal Wrench Crow Foot is used with any 3/8” drive torque wrench to verify pedals are torqued to the correct spec. The TWB-15 is laser cut, heat treated and plated for long life.

The TWB-36 is a crow foot style wrench used with any 3/8-inch drive torque wrench and drive tools with 36mm wrench flats such as Park Tool LRT-2, LRT-3, LRT-4 and BBT-18 to verify components are torqued to the correct specification. Constructed from heat-treated 4130 laser-cut steel and plated for long life.

Bit Set for Pedro's Torque Wrenches Pedro's Large Sizes Hex Bit Set is designed to work with our torque wrenches offering ideal and economical coverage of less common large hex wrench sizes. - The perfect companion for your Pedro's torque wrench. Ideal coverage of less common large hex sizes. - Bits made from premium S2 tool steel and mounted in 3/8" drive chrome vanadium sockets to ensure strength and lasting performance. - Includes 6 hex bits. - Extra length bits in key sizes ensure component compatibility. Set includes: - Hex: 10, 11,12, and 15mm (65mm Length Bit) - Hex: 14 and 16mm (21mm Length Bit)

- Incredibly compact torque wrench with adjustable range from 2-10Nm - Reversible ratcheting head - Includes a 5 bit storage compartment that attaches to the wrench for storage - Also includes the following hex bits 3 4 5 and T20 and T25 Torx bits - P

Compact, easy-to-use-and-read torque wrench provides correct tightening of bolts on frame and component bolts to recommended torque values for safety and performance. Two of your favorite bits can be carried in the handle of the Nano TorqBar X for immediate use and even greater portability during rides. Torque range: 2 – 6 Nm.

- Incredibly compact torque wrench with adjustable range from 2-10Nm - Reversible ratcheting head - Includes a 5 bit storage compartment that attaches to the wrench for storage - Also includes the following hex bits 3 4 5 and T20 and T25 Torx bits - P

Torq Stick Torque Wrech - Pull & rotate to select your target torque value - Audible signal: Torque wrench clicks when preset torque is reached - Storage pen integrated with tool holder snaps to hold the Ratchet Stick together for riding or storage - Turn the ratchet wheel to tighten or loosen mounting bolt - 3, 4, 5 Allen bits, T20, T25 Torx bits included - Material: aluminum and engineering grade polymer body, hardened steel ratchet, S2 hardened steel bits